Jindi Ethernet port 4G full Netcom SMS cat M1806N-NC5
Jindi M1806N-NC5 is a network port 4G full Netcom SMS sending and receiving device, embedded super network port, supporting TCP Client, TCP Server, UDP Client, UDP Server four working modes.
Jindi M1806N-NC5 supports the use of IP+PORT mode, and also supports the use of virtual serial port through software, which solves the problem that the PC software cannot communicate with the networked equipment as a serial port. Automatic connection when the network is disconnected to prevent packet loss caused by power failure and network disconnection. Embedded industrial-grade 4G full Netcom module, supporting the three major operators of China Mobile, China Unicom and China Telecom, compatible with 4G/3G/2G SIM cards, supporting seven modes and eighteen frequency bands, it can truly achieve blind plugging of any SIM card, full Netcom, and the whole network.
When the network is abnormal, the built-in Super Ethernet port can continuously try to re-establish the connection until the network is restored, so there is no need to worry about network disconnection, and the network will be automatically restored without manual intervention. The built-in watchdog function ensures 24-hour stable operation of the equipment without downtime. The purpose of design is to automate and intelligentize everything.
Jindi M1806N-NC5 is mainly used in networked and virtualized environments. Connect HUB, switch, router and other network equipment through network cables, and can access LAN, Internet, docking servers, virtualization servers, private clouds and other intranet or Internet environments.
Main parameters:
| Main parameters: | performance | remark | ||
| minimum | Typical | maximum | ||
| Operating Temperature (°C) | -20 | 25 | +55 | |
| Storage Temperature (°C) | -25 | 25 | +85 | |
| Operating Voltage(V) | 5.0 | 5.0 | 16 | ≥5.0V can guarantee the output power |
| SMS sending speed | 2 seconds/piece | |||
| Serial baud rate (bps) | 9600，19200，38400，57600，115200，230400 | The factory default baud rate is 115200bps | ||
| Serial port parameters | None/8/1 | |||
Network Protocols:
| Main parameters: | description | remark |
|
Band |
LTE（FDD）B1/B3/B5/B8 LTE (TDD) B38/B39/B40/B41 WCDMA Band B1/B3/B5/B8 TD-SCDMA B34/B39 GSM/GPRS/EDGETriBand850/900/1800 CDMA2000 1X/EVDO BC0 |
Support mobile, China Unicom, telecom, support foreign use, The device can automatically search for the frequency, which can also be set by AT command |
| Network protocols | IP、TCP、UDP、DHCP、DNS、HTTP、ARP、ICMP、Web socket | |
| Working mode | TCP Server/TCP Client/UDP Server/UDP Client | Default working mode: TCP Server |
|
How the IP was obtained |
Static IP address, DHCP |
Factory default IP: 192.168.0.7 Default subnet mask: 255.255.255.0 Default gateway: 192.168.0.1 Default local port: 23 |
| data format | Text/PDU | |
| AT Command | Support for standard AT instruction set (Hayes 3GPP TS 27.007 and 27.005) |
Interface parameters:
| Hardware interfaces | description | remark |
| Data interface | RJ45 network port | 10/100Mbps, cross-connect adaptive |
| SIM card interface | 3v/1.8v | |
| Antenna interface | 50Ω characteristic impedance | SMA antenna connector |
| Power connector | 5.5*2.1 round head DC power supply |
Specifications:
| Physical characteristics | description | remark |
| Housing material | metal | DIN rail mounting |
| Dimensions(mm) | 114*55*25 | Accessories are not included |
| Weight (g) | 120 | Accessories are not included |
| fittings | Power adapter, network cable, antenna | |
| 主要参数 | 性能 | 备注 | |||
| 最小值 | 典型值 | 最大值 | |||
| 工作温度（℃） | -20 | 25 | +55 | ||
| 存储温度（℃） | -25 | 25 | +85 | ||
| 工作电压（V） | 5.0 | 5.0 | 16 | ≥5.0v可保证输出功率 | |
| 主要参数 | 描述 | 备注 | |||
| 频段 |
LTE（FDD）B1/B3/B5/B8 LTE (TDD) B38/B39/B40/B41 WCDMA Band B1/B3/B5/B8 TD-SCDMA B34/B39 GSM/GPRS/EDGETriBand850/900/1800 CDMA2000 1X/EVDO BC0 |
支持移动、联通、电信，支持在国外使用， 设备可自动搜寻频率，也可以通过AT指令设置 |
|||
| 网络协议 | IP、TCP、UDP、DHCP、DNS、HTTP、ARP、ICMP、Web socket | ||||
| 工作模式 | TCP Server/TCP Client/UDP Server/UDP Client | 默认工作模式：TCP Server | |||
| IP 获取方式 | 静态IP、DHCP |
出厂默认IP：192.168.0.7 默认子网掩码：255.255.255.0 默认网关：192.168.0.1 默认本地端口：23 |
|||
| 数据格式 | 文本/PDU | ||||
| AT指令 | 支持标准AT指令集（Hayes 3GPP TS 27.007和 27.005） | ||||
| 短信发送速度 | 2秒/条 | ||||
| 串口波特率（bps） | 9600，19200，38400，57600，115200，230400 | 出厂默认波特率115200bps | |||
| 串口参数 | None/8/1 | ||||
| 硬件接口 | 描述 | 备注 | |||
| 数据接口 | RJ45网口 | 10/100Mbps、交叉直连自适应 | |||
| SIM卡接口 | 3v/1.8v | ||||
| 天线接口 | 50Ω特征阻抗 | SMA 天线接头 | |||
| 电源接口 | 5.5*2.1圆头直流电源 | ||||
| 物理特性 | 描述 | 备注 | |||
| 材质 | 金属 | DIN 导轨安装 | |||
| 外形尺寸（mm） | 114*55*25 | 不包括配件 | |||
| 重量（g） | 120 | 不包括配件 | |||
| 配件 | 电源适配器，网线，天线 | ||||
指示灯
| 指示灯状态 | 状态说明 |
| 不亮 | 没有开机或没有供电 |
| 常亮 | 没插SIM卡，信号不好或找不到网络 |
| 快闪 | 工作状态，发短信或打电话 |
信号强弱判断
| AT+CSQ返回结果 | 信号质量 |
| 14~31 | 可以正常工作 |
| 0~13 和 +99 | 信号不够，不能正常工作 |
M1806N-NC5照片
